Place of Origin:
Japan
Brand Name:
Hitachi
Certification:
CE
Model Number:
ZX210W-6
In Japan this class of machine is written ホイール式油圧ショベル and in the trade catalogues it is a wheel type hydraulic shovel: a twenty-one ton excavator on twin road tyres rather than tracks. The ZX210W-6 is the model that made that layout respectable, because it kept the digging performance of the crawler while adding the one capability Japanese contractors could not live without, the ability to move between small urban sites under its own power.
This unit is a used machine sourced for export, powered by the Isuzu 4HK1X turbocharged diesel with mechanical direct injection. Japanese maintenance culture shows in the details buyers look for: original hose clamps still in place, factory paint on the boom pin bosses, no field welding on the frame, and a clean engine bay. The direct injection pump and injectors are the simple mechanical type, so the fuel system survives long service intervals and indifferent diesel far better than later electronically controlled engines, and any competent diesel shop can overhaul it.
Hitachi Construction Machinery has built excavators since 1970 and supplies the hydraulic components, the castings and the control logic from its own plants, which is why a ZX machine feels different from a competitor fitted with bought-in valves. On the ZX210W-6 the three-pump hydraulic system distributes flow according to demand, so boom lift, arm crowd and bucket curl can be combined without the engine bogging down. The result is a machine that feels calm under load and, unusually for its class, thrifty on diesel.
Second-hand buyers in Japan pay a premium for Hitachi for a simple reason: the structural steel lasts. Boom and arm sections are box fabricated from high tensile plate, the boom foot is a casting rather than a weldment, and the upper frame carries load through a reinforced centre section. A used ZX that has been looked after will outlive two sets of tyres and still hold its geometry.
Technical Data| Item | Data |
|---|---|
| Model | Hitachi ZX210W-6 |
| Configuration | Wheel type hydraulic shovel, 4x4 |
| Operating weight | 21,400 kg |
| Engine model | Isuzu 4HK1X, turbocharged, direct injection |
| Output | 122 kW / 2,000 rpm |
| Bucket | 0.9 m3 backhoe, bolt-on teeth |
| Max digging depth | 5,700 mm |
| Max digging reach | 9,200 mm |
| Max dump height | 6,900 mm |
| Gradeability | 35 degrees with outriggers set |
| Tyres | 10.00-20 16PR dual |
| Fuel tank | 380 L |
| Cab | ROPS / FOPS, air conditioned |
| Condition | Used, export inspected |
Japanese buyers use this machine for narrow urban trenching, gas and water main renewal, railway maintenance possessions and small demolition, where a crawler would need a trailer and a permit for every move. Export buyers put it to work on road shoulder repair, canal cleaning and industrial site preparation. The wheeled chassis is also the practical choice for utilities that maintain scattered assets, because the machine is its own transport.
Our Workshop and What We FabricateOur workshop operates a 3,000 square metre production floor with senior welders, CNC cutting, plate rolling and press forming equipment. We build excavator booms, arms, buckets and amphibious excavator pontoons for customers around the world, in any length and any attachment configuration, and we also sell used machines of every major brand. Everything you see on this page was prepared by people who weld excavator structures every day, not by a broker forwarding photographs.
For this ZX210W-6 that capability matters: we can supply a matching 0.8 m3 trenching bucket, a 1.2 m3 bulk shell, a ripper, or a hydraulic quick coupler built to the same pin dimensions, and load them in the same container as the machine. If a customer needs a long reach front end or a dredging pontoon conversion, the engineering is done in house.
Loading, Warranty and Commercial TermsMachines are cleaned, checked for leaks, fitted with new filters on request, waxed and chained onto steel cradles. We load 40HQ containers, flat racks and ro-ro vessels from Nansha and Shenzhen, and provide loading photographs, a condition report and the full shipping set. Price is negotiable, delivery two to five working days for stock units, and we handle the export documentation including certificate of origin.
Frequently AskedIs the hour meter original? We show the meter on video and we can share the service history we received with the machine. Where the history is incomplete we say so rather than guess.
Can you fit a breaker circuit? Yes, we can add auxiliary hydraulic lines and a pedal valve in our workshop before shipment.
Can you supply tyres? Twin 10.00-20 tyres are available new or with 80 percent tread, matched as a set.
Talk to Sophie DirectlyEvery quotation on this machine is handled personally by our foreign trade manager. Send the model you need and you will receive the current condition report, a walk-around video and the exact shipping cost to your port within one working day.
Mobile / WhatsApp / WeChat: +86 18026254557
Email: hfsupply1@163.com
Website: www.excavators-spares.com
Workshop: 3,000 m2 fabrication base, Guangzhou, Guangdong, China
Send your inquiry directly to us