Place of Origin:
China
Brand Name:
SANY
Certification:
CE
Model Number:
SY245H
This 2021 SANY SY245H arrived from a single owner in south China with 4,751 hours on the clock and is offered as a running, work ready machine rather than a project unit. The 147 kW D06FRC engine and the 25.5 ton operating weight put it in the same class as a PC200 or EC210 for transport and site work.
![]()
SANY SY245H, 2021, 4,751 hours
The 147 kW D06FRC engine and the 25.5 ton operating weight put it in the same class as a PC200 or EC210 for transport and site work.
![]()
Working view of the machine in the yard
The SY245H uses a water cooled six cylinder common rail diesel rated at 147 kW, matched to a load sensing hydraulic system with an electronic power control. The result is fine control for trenching and enough flow for a breaker or a wider bucket.
The cab is a pressurised unit with a suspension seat, adjustable armrests, a large glass area and a colour monitor that shows fault codes in plain language, which shortens diagnosis on site.
![]()
Boom, stick and bucket detail
| Parameter | Value |
|---|---|
| Bucket Capacity | 1.3 m³ standard (1.3 - 1.5 m³) |
| Engine Model | D06FRC, 6 cylinder, water cooled |
| Engine Displacement | 6.373 L |
| Rated Power | 147 kW at 2,100 rpm |
| Max Torque | 750 N·m at 1,350 rpm |
| Bucket Digging Force | 175 kN |
| Arm Digging Force | 120 kN |
| Standard Boom / Stick | 5.9 m / 2.95 m |
| Max Digging Depth | 6,705 mm |
| Max Digging Radius | 10,225 mm |
| Max Digging Height | 9,745 mm |
| Max Dump Height | 6,715 mm |
| Swing Speed | 10.6 rpm |
| Travel Speed | 5.4 / 3.4 km/h |
| Gradeability | 70% (35°) |
| Ground Pressure | 53.2 kPa |
| Fuel Tank | 475 L |
| Hydraulic Tank | 239 L |
| Transport Dimensions | 10,290 x 3,190 x 3,190 mm |
| Track Shoe Width | 600 mm |
| Track Rollers / Carrier Rollers | 9 / 2 per side |
| Tail Swing Radius | 3,105 mm |
| Condition | Used, running, inspected before shipment |
| Brand | SANY |
| Model | SY245H |
| Year of Manufacture | 2021 |
| Working Hours | 4,751 h |
| Machine Type | Crawler hydraulic excavator, 24 ton class |
| Operating Weight | 25,500 kg |
Engine compression and blow by, hydraulic pressure at the main relief, swing bearing clearance, track tension, pin and bushing play in the bucket linkage, plus a full leak check on the cylinders and valve block.
The machine is run through a full cycle under load in our yard: boom up and down, stick in and out, bucket roll, swing both directions, and travel in both speeds, all recorded on video.
![]()
Undercarriage and hydraulic components
Container is the cheapest option for a single 25 ton machine, flat rack suits a unit with a wide bucket or long arm, and bulk vessel is used when the buyer takes three or more units at once.
We can ship up to 100 units a month from our own yard and partner yards in Guangdong, which is what allows a 2 to 5 day loading window on stock machines.
We buy, refurbish and export used excavators, and we also produce booms, long reach arms, buckets and pontoons in our own workshop. For buyers who need both a machine and parts support, that combination keeps the shipment in one place.
Ask for the inspection report and the cold start video before you decide; we send both for any machine we list.
Contact
Tel / WhatsApp / WeChat: +86 18026254557 (WhatsApp / WeChat)
Email: hfsupply1@163.com
Container loading in progress. The machine is positioned over the container centre line, the bucket is pinned back, and lashing is taken through the track frame rather than the sheet metal.
![]()
Container loading, tracks blocked and machine lashed for shipment
![]()
Loaded unit ready for the port
Send your inquiry directly to us