Place of Origin:
China
Brand Name:
SANY
Certification:
CE
Model Number:
SY245H
This 2021 SANY SY245H arrived from a single owner in south China with 4,751 hours on the clock and is offered as a running, work ready machine rather than a project unit. We send a walk around video, cold start video and photographs of the hour meter, hydraulic cylinders and track shoes before any deposit is paid.
![]()
SANY SY245H, 2021, 4,751 hours
We send a walk around video, cold start video and photographs of the hour meter, hydraulic cylinders and track shoes before any deposit is paid.
![]()
Working view of the machine in the yard
The cab is a pressurised unit with a suspension seat, adjustable armrests, a large glass area and a colour monitor that shows fault codes in plain language, which shortens diagnosis on site.
The SY245H uses a water cooled six cylinder common rail diesel rated at 147 kW, matched to a load sensing hydraulic system with an electronic power control. The result is fine control for trenching and enough flow for a breaker or a wider bucket.
![]()
Boom, stick and bucket detail
| Parameter | Value |
|---|---|
| Condition | Used, running, inspected before shipment |
| Tail Swing Radius | 3,105 mm |
| Track Rollers / Carrier Rollers | 9 / 2 per side |
| Track Shoe Width | 600 mm |
| Transport Dimensions | 10,290 x 3,190 x 3,190 mm |
| Hydraulic Tank | 239 L |
| Fuel Tank | 475 L |
| Ground Pressure | 53.2 kPa |
| Gradeability | 70% (35°) |
| Travel Speed | 5.4 / 3.4 km/h |
| Swing Speed | 10.6 rpm |
| Max Dump Height | 6,715 mm |
| Max Digging Height | 9,745 mm |
| Max Digging Radius | 10,225 mm |
| Max Digging Depth | 6,705 mm |
| Standard Boom / Stick | 5.9 m / 2.95 m |
| Arm Digging Force | 120 kN |
| Bucket Digging Force | 175 kN |
| Max Torque | 750 N·m at 1,350 rpm |
| Rated Power | 147 kW at 2,100 rpm |
| Engine Displacement | 6.373 L |
| Engine Model | D06FRC, 6 cylinder, water cooled |
| Bucket Capacity | 1.3 m³ standard (1.3 - 1.5 m³) |
| Operating Weight | 25,500 kg |
| Machine Type | Crawler hydraulic excavator, 24 ton class |
| Working Hours | 4,751 h |
| Year of Manufacture | 2021 |
| Model | SY245H |
| Brand | SANY |
The machine is run through a full cycle under load in our yard: boom up and down, stick in and out, bucket roll, swing both directions, and travel in both speeds, all recorded on video.
Engine compression and blow by, hydraulic pressure at the main relief, swing bearing clearance, track tension, pin and bushing play in the bucket linkage, plus a full leak check on the cylinders and valve block.
![]()
Undercarriage and hydraulic components
Loading is normally from Shenzhen, Guangzhou or Shanghai, and we can quote CFR or CIF to the destination port the buyer nominates.
Bill of lading, commercial invoice, packing list, original certificate of origin and, where required, a pre shipment inspection certificate are provided for customs clearance.
our company has traded used excavators and excavator spare parts since 2013. Our range covers most part numbers for the major brands, which means one enquiry can cover a machine, a spare bucket and a set of track rollers.
Message us on WhatsApp for a walk around video, or email the model and destination port and we will reply with a quotation and a loading plan.
Contact
Tel / WhatsApp / WeChat: +86 18026254557 (WhatsApp / WeChat)
Email: hfsupply1@163.com
This is how the machine leaves us: tracks blocked, bucket secured, arm folded and the whole unit strapped to the container floor, with the loading sequence photographed for the buyer.
![]()
Container loading, tracks blocked and machine lashed for shipment
![]()
Loaded unit ready for the port
Send your inquiry directly to us