logo
Home > Products > Excavator Hydraulic Parts >
Aluminum Bar Plate Hydraulic Oil Cooler Core Assembly ZX200-3 Excavator Heat Exchanger 3.0MPa

Aluminum Bar Plate Hydraulic Oil Cooler Core Assembly ZX200-3 Excavator Heat Exchanger 3.0MPa

ZX200-3 excavator hydraulic oil cooler

aluminum bar plate heat exchanger core

3.0MPa excavator hydraulic oil cooler

Place of Origin:

Guangdong, China

Brand Name:

HF

Certification:

ISO 9001:2015

Model Number:

ZX200-3

Contact Us
Request A Quote
Product Details
Core Construction:
Vacuum Brazed Bar And Plate Aluminium
Working Pressure:
3.0 MPa Hydrostatic Test
Fin Type:
Louvred Multi-louver Fin
Tube Alloy:
3003 Aluminium, Clad 4045
Surface Finish:
Anti-corrosion Epoxy Coating
Oil Connection:
Threaded Boss, Original Position
Operating Temperature:
-20 C To 120 C Continuous
Quality Control:
Helium Leak Detection On Sample Units
Highlight:

ZX200-3 excavator hydraulic oil cooler

,

aluminum bar plate heat exchanger core

,

3.0MPa excavator hydraulic oil cooler

Payment & Shipping Terms
Minimum Order Quantity
1 Piece
Price
Negotiable - quotation within 8 working hours
Packaging Details
Plywood wooden case with anti-rust film, foam corner protection and moisture barrier bag
Delivery Time
2-5 days after payment confirmation
Payment Terms
T/T, L/C, Western Union, Alipay
Supply Ability
10000000 Pieces per Month
Product Description

Built Around The Core: Bar-Plate Oil Cooler For ZX200-3

Most oil cooler failures start inside the core - a cracked tube, a lifted braze seam, a blocked fin pack. This unit is specified from the inside out, so the part that actually rejects the heat is the part we spend the money on.

Core Specification

ConstructionVacuum brazed bar and plate, single furnace cycle
Tube and fin alloy3003 base aluminium with 4045 cladding
Fin designLouvred fin pack to break up the boundary layer
Pressure test3.0 MPa hydrostatic, held and inspected
CoatingAnti-corrosion epoxy, mud and salt spray resistant
Suitable machineHitachi ZX200-3 hydraulic circuit

Production And Inspection Sequence

  1. Core stacked and fixtured, then vacuum brazed in a single furnace cycle so every seam forms together.
  2. Cooling header welded and machined to the original port layout.
  3. Hydrostatic test at 3.0 MPa - the unit is held under pressure and checked for drop and weeping.
  4. Surface cleaned, coated, and cured before any packing material touches the fins.
  5. Final dimensional check against the sample part, then wooden case packing.

Where This Core Pays Off

Machines working in mud, slurry or coastal air see the fastest cooler degradation. The coated fin pack resists clogging and surface corrosion, and the louvred fin layout keeps the oil temperature stable during long digging cycles instead of climbing through the shift.

Commercial Terms

Pricing: negotiable, based on quantity and shipping terms.
Lead time: 2-5 days after payment.
Capacity: 10,000,000 pieces per month available across the range.
Packaging: wooden case with foam corner blocks and a moisture barrier bag.

Core Details, Photographed

louvred aluminium fin pack macro

Louvred fin pack, macro - Louvred fins break up the boundary layer to move more heat through the same face area.

brazed header seam detail

Brazed header seam - A single vacuum braze cycle forms every joint together, which is where most aftermarket cores fail.

machined oil port detail

Machined oil port - Threads are cut after brazing so the port stays round and seals cleanly against the hose fitting.

About Our Company

our excavator parts company

This is where your order is picked, inspected and crated. Every cooler is checked against the machine model before it is packed.

hydraulic oil cooler supplied by us
What we supply
Hydraulic pumps, motors and control valves, engine assemblies and short blocks, seal kits, electrical and cab parts, undercarriage, buckets and attachments, radiators and oil coolers.
Brands covered
Hitachi, Komatsu, Kobelco, Hyundai, Doosan, Sany, XCMG, Liugong and more.

Spare Parts Supply, One Window

From a single oil cooler to a full container of undercarriage, engine and hydraulic spares, our team sources across all major excavator brands and most model ranges. Tell us the model, serial number or OE reference and we will quote within one working day.

Direct line: +86 18026254557  |  Email: hfsupply1@163.com

Send your inquiry directly to us

Privacy Policy China Good Quality Excavators Spares Supplier. Copyright © 2024-2026 Guangzhou Haofeng Supply Chain Management Co., Ltd . All Rights Reserved.