logo
Home > Products > Excavator Hydraulic Parts >
Excavator Hydraulic Oil Cooler Replacement ZX200-3 Overheating Repair Kit With Mounting Seals

Excavator Hydraulic Oil Cooler Replacement ZX200-3 Overheating Repair Kit With Mounting Seals

ZX200-3 hydraulic oil cooler replacement

excavator hydraulic cooler with mounting seals

overheating repair kit hydraulic parts

Place of Origin:

Guangdong, China

Brand Name:

HF

Certification:

ISO 9001:2015

Model Number:

ZX200-3

Contact Us
Request A Quote
Product Details
Application:
Hitachi ZX200-3 Overheating Diagnosis And Repair
Kit Contents:
Oil Cooler Assembly, Mounting Seals, Port Caps
Fault Symptoms:
Oil Temperature Alarm, Slow Cycle, Hot Return Line
Diagnosis Support:
Checklist Supplied With Quotation
Typical Cause:
Blocked Fin Pack, Internal Leak, Collapsed Hose
Install Time:
3-5 Hours For One Fitter
Packing:
Wooden Case With Seals Bagged Separately
Warranty Handling:
Photo And Video Based Claim Review
Highlight:

ZX200-3 hydraulic oil cooler replacement

,

excavator hydraulic cooler with mounting seals

,

overheating repair kit hydraulic parts

Payment & Shipping Terms
Minimum Order Quantity
1 Piece
Price
Negotiable - quotation within 8 working hours
Packaging Details
Plywood wooden case with anti-rust film, foam corner protection and moisture barrier bag
Delivery Time
2-5 days after payment confirmation
Payment Terms
T/T, L/C, Western Union, Alipay
Supply Ability
10000000 Pieces per Month
Product Description

Overheating On A ZX200-3? Confirm The Cause Before You Buy

A hot hydraulic system is not always a failed cooler. Before spending money, run through the checks below - if two or more match, the cooler is the likely culprit and this kit is the right repair.

Fault Checklist

SymptomWhat It Usually Means
Oil temperature alarm after 30-60 minutesReduced heat rejection from the cooler core
Fin pack packed with mud, dust or strawAir side blocked, cleaning may be enough
Oil weeping at the header or tank seamInternal leak or failed braze joint
Sluggish cycle when the machine is warmOil viscosity drop from sustained high temperature

Replacement Sequence

  1. Relieve hydraulic pressure and drain the tank to a clean container.
  2. Disconnect both oil lines and cap them immediately to keep dirt out.
  3. Remove the mounting bolts and lift the old cooler clear of the frame.
  4. Clean the mounting face and fit the new seals from the kit.
  5. Set the new assembly in place, torque the bolts evenly, reconnect the lines.
  6. Refill, run the machine at low idle, check for weeping, then top up.

In The Box

Oil cooler assembly, mounting seals bagged separately, port caps, and a copy of the checklist above so your fitter can rule out the simple causes. Return filter and hydraulic oil are available on the same order if you want to complete the service in one go.

Ordering Details

Price: negotiable, confirmed against quantity and destination.
Delivery: 2-5 days after payment.
Capacity: 10,000,000 pieces per month across the parts range.
Packing: wooden case, seals packed separately so nothing is lost in transit.

The Kit, Pictured

  1. oil cooler with mounting seals

    Replacement cooler with mounting seals - Seals ship bagged with the cooler so nothing goes missing on site.

  2. core face inspection before fitting

    Core face before fitting - Check the fin pack for transit damage before you release the old unit.

  3. packed oil cooler repair kit

    Kit as packed - Cooler, seals and port caps in one wooden case, ready for the workshop.

About Our Company

our excavator parts company

Parts desk and warehouse under one roof, which is how we keep the 2-5 day dispatch promise on stock cooling items.

hydraulic oil cooler supplied by us
What we supply
Hydraulic pumps, motors and control valves, engine assemblies and short blocks, seal kits, electrical and cab parts, undercarriage, buckets and attachments, radiators and oil coolers.
Brands covered
Hitachi, Komatsu, Kobelco, Hyundai, Doosan, Sany, XCMG, Liugong and more.

Machine Down? Reach Us Now

Overheating stops production. Our parts desk handles urgent excavator breakdowns for every common brand and model, and most cooling items leave the warehouse within 2-5 days of payment.

Urgent line / WhatsApp: +86 18026254557
Email: hfsupply1@163.com

Send your inquiry directly to us

Privacy Policy China Good Quality Excavators Spares Supplier. Copyright © 2024-2026 Guangzhou Haofeng Supply Chain Management Co., Ltd . All Rights Reserved.